Question

Прикрепление подогнутого края на швейной машине

Answer 1

Стачивание (стачать) - это ниточное соединение двух или нескольких приблизительно равных по величине деталей, совмещенных по срезам. Применение: стачивание плечевых, боковых срезов и т.д. Притачивание (притачать) - это соединение двух или нескольких деталей разных по величине.

Answer 2

Attaching a Folded Edge on a Sewing Machine

Attaching a folded edge on a sewing machine is a common technique used in sewing to create a clean and finished look. Here's a step-by-step guide on how to attach a folded edge using a sewing machine:

1. Prepare the fabric: Start by folding the edge of the fabric to the desired width. You can use an iron to press the fold and make it crisp.

2. Set up the sewing machine: Thread the sewing machine with a matching thread color and install a straight stitch presser foot. Adjust the stitch length according to your preference.

3. Position the fabric: Place the folded edge of the fabric under the presser foot, aligning it with the edge guide on the sewing machine.

4. Start sewing: Lower the presser foot and begin sewing slowly. Make sure to guide the fabric evenly and keep the folded edge aligned with the edge guide.

5. Backstitch at the beginning and end: Backstitch a few stitches at the beginning and end of the seam to secure the thread.

6. Finish the seam: Once you reach the end of the fabric, backstitch again to secure the thread. Trim any excess thread.

7. Press the seam: After sewing, press the seam with an iron to set the stitches and give it a professional finish.

It's important to note that the specific steps may vary depending on the type of sewing machine you are using and the fabric you are working with. It's always a good idea to consult the instruction manual of your sewing machine for more detailed guidance.

I hope this helps! Let me know if you have any further questions.