Question

Написать 10 предложений о том,как делают бумагу.(НА АНГЛИЙСКОМ!!!!)

Answer 1

Ответ:

To understand how paper is made, you must first determine its type, because the composition of the raw materials can be different. The main material in the paper industry is wood. Whole shafts are delivered to the mills. There they remove the bark, cut it. Then the raw materials are ground into flour - to fibril fibers. The technology consists of the following stages:

mass treatment - grinding, dyeing, mixing plant and chemical components;

dilution of the mass with water, purification, pressing and drying;

calendaring;

cutting, sorting and packaging. The paper manufacturing process begins with the grinding of raw materials in continuously operating machines. The factories use rolls, conical and disk type mills, refiners. The paper manufacturing process begins with the grinding of raw materials in continuously operating machines

Answer 2

Certainly, here are 10 sentences on how paper is made:

1. Paper is typically made from wood pulp, which is the primary raw material used in its production.
2. The process begins by harvesting trees, usually pine or spruce, and then chipping the wood into small pieces.
3. These wood chips are then boiled in a mixture of water and chemicals to break down the fibers and remove impurities.
4. After boiling, the resulting pulp is washed and bleached to achieve the desired level of brightness and cleanliness.
5. Next, the pulp is mixed with water to create a slurry, which is then spread onto a mesh screen or conveyor belt.
6. As the water drains away, the pulp fibers begin to bond together, forming a thin sheet of paper.
7. The sheet of paper is then passed through heated rollers to remove remaining moisture and further strengthen the paper.
8. Depending on the desired end product, additional coatings or treatments may be applied to enhance texture, finish, or printability.
9. After these processes, the paper is cut into sheets or rolled into large rolls, ready for distribution to manufacturers, printers, or consumers.
10. Recycling is a common practice in paper production, where used paper products are collected, de-inked, and processed to create new paper, reducing the need for fresh wood pulp.